Samsung Details 11LPP Process Technology: 10 nm BEOL Meets 14 nm Elements

Samsung has added a new manufacturing technology into its roadmap. The 11LPP fabrication process is designed for mainstream and higher-end smartphone SoCs. The technology will come online next year and will build upon the company’s 14- as well as 10 nm-branded process technologies.

The Samsung 11LPP process is another hybrid process technology designed to speed up migration from one node to another by Samsung Foundry. Notably, the new node is not another 14LPP-based offering featuring 20 nm BEOL (back end of line) interconnects. Instead 11LPP is based on Samsung’s 10 nm BEOL and therefore enables smaller chips than technologies based on Samsung’s 14 nm-branded offerings. Meanwhile, the 11LPP still uses some of the elements featured by Samsung’s 14LPP fabrication process.

Last October Samsung began to produce ICs using its 10LPE (10 nm low-power early) manufacturing tech and these days Samsung is getting ready to start producing semiconductors using its 10LPP (10 nm low power plus) process. The company uses both fabrication technologies to make leading edge SoCs for smartphones and other devices, whereas mainstream, low-power and compact chips are to be products using its 14 nm-branded technologies.

The 11LPP will fill the gap between the 10 nm and 14 nm-based offerings. The technology is designed primarily to increase transistor density and provide further improvements on the frequency, transistor count and, to some degree, power consumption fronts. Samsung promises that it will deliver up to 15% higher performance compared to the 14LPP at the same transistor count and power. Furthermore, the 11LPP will enable up to a 10% area reduction at the same transistor count when compared to the 14LPP. In addition, the 11LPP will enable higher transistor density when compared to the 14LPP fabrication process.

Sometime next year, the company intends to start producing its most advanced SoCs using its 8LPP technology featuring EUV for select layers and thus speeding up their cycle times. Meanwhile, the introduction of the first commercial EUV process is not going to stop evolution of DUV technologies. In the coming quarters, Samsung intends to introduce its 14LPU and 10LPU fabrication processes for ultra-low-power applications as well as its all-new 11LPP, which will enable existing customers to shrink their SoCs.

Samsung expects to begin production using its 11LPP manufacturing technology in the second half of 2018. Exact 11LPP high-volume manufacturing schedule of Samsung’s customers depends on their plans.

Related Reading:

• Samsung and TSMC Roadmaps: 8 and 6 nm Added, Looking at 22ULP and 12FFC
• Samsung Announces Exynos 8895 SoC: 10nm, Mali G71MP20, & LPDDR4x
• Samsung Foundry Announces 10nm SoC In Mass-Production