Categorie
Energia

La Polonia calpesta l’accordo sul clima per difendere il suo carbone

La Polonia calpesta l'accordo sul clima per difendere il suo carbone

(Rinnovabili.it) – La strada dell’Unione Europea verso la ratifica dell’Accordo sul clima è sempre più in salita. A mettersi di traverso questa volta è la Polonia, che vede come fumo negli occhi l’ipotesi – avanzata negli ultimi giorni – di procedere prima a una ratifica a livello Ue, e solo in seguito con un voto dei singoli parlamenti nazionali. Il contenuto di una lettera inviata dal ministro dell’Ambiente di Varsavia Jan Szyszko ai suoi omologhi infatti lascia poco spazio alle interpretazioni.

La farraginosità e la lentezza dei membri Ue è ormai arrivata a livelli imbarazzanti. Colpa, se così si può dire, dell’inattesa ratifica dell’accordo sul clima da parte della Cina: inattesa per Bruxelles, che contava su un temporeggiamento ben più lungo di Pechino. Ma da quando il secondo più grande inquinatore del pianeta ha aggiunto la sua firma, il raggiungimento delle clausole minime perché l’accordo entri in vigore è dietro l’angolo. La soglia richiesta dei 55 Stati firmatari è stata superata, e quella del 55% delle emissioni è a un passo. Con l’India e il Giappone che stanno per unirsi, l’accordo può entrare in vigore alla COP22 di novembre senza che l’Ue si sia ancora mossa.

La Polonia calpesta l'accordo sul clima per difendere il suo carbonePer questo le diplomazie europee si dovrebbero incontrare venerdì 30: all’ordine del giorno la decisione di creare un binario preferenziale per la ratifica, che eviti la figuraccia e riservi un posto all’Europa nel gruppo dei Paesi che potranno decidere modi e tempi dell’implementazione. Ma in questo modo bisogna scavalcare la sovranità nazionale di tutti i membri. E la Polonia sembra decisa ad approfittarne.

Nella lettera inviata da Szyszko, infatti, Varsavia detta le sue condizioni: sì alla firma rapida a livello Ue, ma solo se saranno date precise garanzie alla Polonia. La richiesta è che venga tenuto conto degli sforzi compiuti finora dal paese est europeo e della specificità del suo mix energetico. Tradotto: la Polonia ha un’economia fortemente dipendente dal carbone e dalla lignite (che Szyszko cita espressamente), perciò la firma arriverà soltanto se Bruxelles acconsente a un trattamento di favore. Già lo scorso luglio Varsavia aveva chiesto uno “sconto” del 7% sulla riduzione delle emissioni nazionali rispetto all’obiettivo europeo fissato al taglio del 40% entro il 2030 sui valori del 1990.

Autore: Rinnovabili

Categorie
Economia

Forex e CFD: Saxo Bank offre maggiore liquidità e trasparenza con l’introduzione di un nuovo modello esecuzione ordini

trading online, trader, saxo bank, novita, piattaforma trading, forex, cfd, opzioni, infrastruttura trading, OpenAPI, SaxoTraderGO

Saxo Bank, specialista nel trading e negli investimenti online, ha annunciato il lancio di un nuovo sistema “Order Driven Execution” per il Forex Spot, Forex Forward e per i CFD su Indici e Materie Prime, allineandosi a quanto già offerto su altre asset class e consolidando la propria offerta di trading multi-asset.

Il modello Order Driven, attualmente in modalità di test in vista del lancio previsto in novembre, offrirà ai clienti un prezzo di esecuzione basato sulla liquidità offerta da Saxo Bank in aggiunta a quella disponibile sui mercati.

Il nuovo modello è al centro del continuo impegno di Saxo nel fornire le migliori modalità di esecuzione, dando ai clienti l’opportunità di ottenere il controllo completo del loro trading, offrendo loro una sempre maggiore trasparenza ed autonomia. Ciò significa maggiore elasticità per il cliente nello scegliere i prezzi dei propri ordini, migliori prezzi offerti, possibilità di eseguire gli ordini anche parzialmente.

“Il Forex, come asset class, ha vissuto una notevole crescita negli ultimi dieci anni ed è fondamentale che i sistemi di esecuzione siano al passo dell’evoluzione del settore. In particolare, tecnologia e automazione offrono l’opportunità di migliorare costantemente l’esperienza dei clienti e di offrire loro maggiore controllo e trasparenza sugli ordini, aumentando allo stesso tempo ampiezza e profondità del mercato”, ha commentato Kurt vom Scheidt, Global Head of Foreign Exchange di Saxo Bank.

“Siamo orgogliosi di guidare la nostra industry verso una migliore efficienza e trasparenza del mercato Forex. In quanto “early adopter” del FX Global Code of Conduct e delle nuove linee guida per la “best execution” che verranno applicate dalla MiFID II, siamo in grado di offrire un processo di gestione degli ordini più trasparente”, ha proseguito vom Scheidt.

“In Saxo Bank stiamo cercando di apportare miglioramenti all’intero settore Forex, perché per noi è fondamentale che i nostri clienti possano usufruire dei vantaggi derivanti da una maggiore fiducia e una migliore modalità di esecuzione degli ordini. Questa innovazione è parte di una serie di progetti che abbiamo portato alla luce nell’ultimo anno e desideriamo proseguire in questa direzione, verso standard sempre migliori”, ha concluso il suo intervento il manager della banca danese.

“Abbiamo dato il via a questo progetto per offrire ai clienti un migliore accesso alla liquidità dei mercati l’anno scorso, quando siamo passati, per i CFD su Azioni, ad un puro modello DMA (Accesso Diretto al Mercato) utilizzando la tecnologia Smart Order Routers per offrire la maggior liquidità possibile e aumentare l’efficienza nell’esecuzione degli per i nostri clienti. Ora proseguiremo questo viaggio in tutta la galassia dei CFD e riteniamo che questo possa migliorare notevolmente l’esperienza di trading dei nostri clienti”, ha a sua volta evidenziato Søren Nedergaard, Global Head of CFD & Listed Products di Saxo Bank.

VN:F [1.9.20_1166]

please wait…

Rating: 0.0/10 (0 votes cast)

VN:F [1.9.20_1166]

Rating: 0 (from 0 votes)

Autore: Finanza.com Blog Network Posts

Categorie
HardwareSoftware

Xilinx Launches Cost-Optimized Portfolio: New Spartan, Artix and Zynq Solutions

Some of the key elements of the embedded market are cost, power and efficiency. A number of applications for embedded vision and IoT, when applying complexity, rely on the addition of additional fixed function of variable function hardware to accelerate throughput. To that end, the product has multiple FPGA/SoC devices to achieve the goal. The FPGA market is large, however Xilinx is in the process of redefining their product ecosystem to include SoCs with FPGAs built in: silicon with both general purpose ARM processors (Cortex-A series) and programmable logic gates to deal with algorithm acceleration, especially when it comes to sensor fusion/programmable IO and low-cost devices.  As a result, Xilinx is releasing a new single-core Zynq 7000 series SoC with an embedded FPGA, as well as new Spartan-7 and Artix-7 FPGAs focused on low cost.

The new Spartan-7, built on 28nm TSMC and measuring 8x8mm, is aimed at sensor fusion and connectivity, while the Artix-7 is for the signal processing market. The Zynq-7000 is for the programmable SoC space, featuring a single ARM Core (various models starting with Cortex-A9, moving up to dual/quad Cortex-A53) allowing for on-chip analytical functions as well as host-less driven implementations and bitstream encryption. The all-in-one SoC with onboard FPGA adds a benefit in bringing a floorplan design of multiple chips down from three to one, with the potential to reduce power and offer improved security by keeping the interchip connections on silicon. While the Zynq family isn’t new, the 7000 series for this announcement is aimed squarely at embedded, integrated and industrial IoT platforms by providing a cost-optimized solution.

Gallery: Xilinx Product Specifications

We spoke with Xilinx’s Steve Glaser, SVP of Corporate Strategy, who explained that Xilinx wants to be in the prime position to tackle four key areas: Cloud, Embedded Vision, Industrial IoT and 5G. The use in the cloud is indicative of high focused workloads that land between ASICs and general purpose compute, but also for networking (Infiniband) and storage, with Xilinx IP in interfaces, SSD controllers, smart networking, video conversion and big data. This coincides with the announcement of the CCIX Consortium for coherent interconnects in accelerators.

Embedded Vision is a big part of the future vision of Xilinx, particularly in automotive and ADAS systems. Part of this involves machine learning, and the ability to apply different implementations on programmable silicon as the algorithms adapt and change over time. Xilinx cites a considerable performance and efficiency benefit over GPU solutions, and a wider range of applicability over fixed function hardware.

Industrial IoT (I-IoT) spans medical, factory, surveillance, robotics, transportation, and other typical industry verticals where monitoring and programmability go hand-in-hand. Steve Glaser cited that Xilinx has an 80% market share in I-IoT penetration, quoting billions of dollars in savings industry wide for very small efficiency gains on the production line.

One thing worth noting that FPGA and mixed SoC/FPGA implementations require substantial software on top to operate effectively. Xilinx plays in all the major computer vision and neural network implementations, and we were told with an aim to streamline compilation with simple pragmas that identify code structures for FPGA implementation. This is where the mixed SoC/FPGA implementations, we are told, work best, allowing the analytics on the ARM cores to adjust the FPGA on the fly as required depending on sensor input or algorithm adjustment.

Xilinx sits in that position as being a hardware provider for a solution, but not the end-goal solution provider, if that makes sense. Their customers are the ones that implement what we see in automotive or industrial, so they typically discuss their hardware at a very general level but it still requires an understanding of the markets they focus on to discuss which applications may benefit from FPGA or mixed SoC/FPGA implementations. When visiting any event about IoT or compute as a journalist, there always involves some discussion around FPGA implementation and that transition from hardware to software to product. Xilinx is confident about their position in the FPGA market, and Intel’s acquisition of Altera has the markets where both companies used to compete has raised a lot of questions about FPGA roadmaps, with a number of big customers now willing to work on both sides of the fence to keep their options open.

On the new cost-optimized chip announcement, the Spartan-7, Artix-7 and Zynq-7000 will be enabled in the 2016.3 release of the Vivado Design Suite and Xilinx SDx environments later this year, with production devices shipping in Q1 2017.

Gallery: Xilinx Slide Deck

Autore: AnandTech

Categorie
Calcio

Cristiano Ronaldo, preparado para la Champions

El atacante portugués del Real Madrid está listo para el duelo con el Borussia Dortmund

Cristiano Ronaldo ha publicado en su cuenta de Twitter una foto entrenándose en Dortmund y con un emoticono tremendamente explicativo, con el pulgar hacia arriba.

¿Dónde ver el Borussia Dortmund – Real Madrid?

El portugués es el máximo anotador histórico de la Champions League. Enfrente tendrá al Borussia Dortmund, el principal competidor con el Real Madrid por hacerse con la primera plaza de grupo.

El ‘7’ luso ha sido protagonista en estas últimas horas tras la reacción que tuvo al ser sustituido en Gran Canaria ante Las Palmas, en el último partido de los merengues en LaLiga Santander.

Autore: Goal.com News – Español – España

Categorie
HardwareSoftware

Sudden rise in notebook demand surprises manufacturers

Short supply of components

A sudden rise in Notebook demand has caught suppliers on the hop and component suppliers say they have not got enough to flog.

Digitimes said that several components including panel, batteries and solid state drive (SSD), reportedly are suffering from shortages, which could damage the sudden resurgence of notebooks.
Country to the belief in the Tame Apple Press that notebooks were dead the moment that Steve Jobs invented the tablet and bought about the mobile revolution, Notebooks have been making a comeback.

HP and Dell have already increased their notebook shipment forecasts for the second half of 2016 and first half of 2017 recently. Demand for notebooks has also been rising since the second quarter and is growing even stronger in the third quarter.

Apparently the rise is due to new processor technology from Intel and a final acceptance that Windows 10 was not the pile of dog doo that the Tame Apple Press claimed. What is more likely is that the notebook sales were slow for economic reasons and the fact that there was no compelling reason to upgrade from a notebook which was two or three years old.

Now companies are starting to refresh there is suddenly a shortage and vendors have been aggressively securing their component supply, hoping to sort everything out before lucrative holiday sales are damanged.

Panel shortages occurred first and most vendors can’t to secure a sufficient volume of supply even if they are willing to pay more. Most vendors have been scouting for new supply sources.

SSD demand has also been picking up as the component has become necessary for ultra-thin notebooks. Apple’s releases of the ultra-thin MacBook Pro, has triggered more vendors to design similar products, and also has had some contribution to rising SSD demand.

Most lithium battery makers have turned their focus from the notebook market to the electric vehicle market so notebook vendors are also seeing trouble acquiring sufficient battery supply for their products, Digitimes said.

Autore: Fudzilla.com – Home